Local Battery Installers Get a quote
  1. Front
  2. Guides
  3. Pylontech: should you install one?

Hardware · Comparison

Pylontech: should you install one?

Updated

A home battery cabinet in a British utility room, next to the consumer unit
A home battery cabinet in a British utility room, next to the consumer unit

Pylontech modules are rack batteries used behind a range of hybrids. They are not a whole-home product by themselves.

Where this kit fits

The inverter determines solar charging, export limiting and any backup output. Garage installs where the buyer accepts a rack aesthetic and a separate hybrid inverter. It is a weak buy when hallway cupboards, listed interiors and buyers who want a single furniture-grade cabinet.

Hallway cupboards, listed interiors and buyers who want a single furniture-grade cabinet.

A September 2026 figure for Pylontech

Take a 9.6 kWh pack, cycled about 280 times, at 90% round trip. Charge at 13.0p, and value what comes back at 27.2p. Export given up is priced at 6.0p. About 2160 kWh a year of the charge is treated as spare solar from 4 kWp that might otherwise have been exported. Delivered energy is about 3402 kWh. After charging cost and lost export, the figure saves about £611 a year. Set that against £7,965 fitted, which is a September 2026 illustration at the temporary 0% residential rate, not a quote. That is a simple payback of about 13.0 years on these assumptions. Nudge the night rate up by 4p and see if you still like it.

In most single-phase houses in Britain, 5 kW sits above the 3.68 kW G98 line, so this wants a G99 application before anyone energises it. Export can still be capped. Agree that before the inverter is ordered. The figure uses 9.6 kWh and 4 kWp, which is enough to tell two quotes apart if they assumed something else.

At a steady 600 W evening load, 9.6 kWh lasts about 16.0 hours. A 3 kW kettle only works if the inverter can deliver it. Capacity on the badge does not answer that.

VAT, paperwork, refusal

Where the job is a qualifying install in a home, the 0% rate runs to 31 March 2027 and is due to become 5% after that. This figure prices the work at £7,965 on that basis. It does not apply to a shop, and it does not apply to a battery you buy and fit yourself.

I would not pay the bulk of £7,965 before the DNO route for a 5 kW inverter is known.

Ask the installer for the last Pylontech they commissioned: postcode area, inverter size, and whether G99 was required. A first-ever install of this range is a risk you can choose not to fund.

Common questions

Is the price on this page a quote?

No. £7,965 is a September 2026 illustration for a 9.6 kWh example at the temporary 0% residential rate. Your survey replaces it.

Will it stay on in a power cut?

Only if a gateway or essential-load board was designed and paid for. A standard grid-tied battery turns off with the grid. On this 9.6 kWh example the inverter is 5 kW, and backup is still a separate line.

What paperwork should I keep?

Keep the MCS certificate where the job is certified, the electrical certificate, the DNO record, the schematic, the warranty registration and a photo of the schedule. For an illustrated £7,965 job, that folder is part of what you bought.

What if the cheap rate is not 7p?

Then the figure changes. This page used 13.0p as a charge rate and 27.2p as the rate avoided. A smaller gap means a worse payback. Read the live tariff.

Sources

Want a price for your house?

The figures above are a rough guide. An installer still needs to see your fuse board, where the battery will go, and whether you want power during a blackout.

Get a quote
Get a quote